抹面砂漿主要用于苯薄抹灰保溫系統中保溫層外的抗裂保護層，亦被稱為聚合物抹面抗裂砂漿。主要施工于各種墻體保溫面層，形成優異抗裂防滲面層，有利于保護保溫基層的綜合性能，提高保溫面層界面的親和性，為后序飾面材料施工提供優異的界面基層。下面來講講濟南抹面砂漿的適用以及其他注意事項。

The plastering mortar is mainly used for the anti-crack protective layer outside the insulation layer in the benzene thin plastering insulation system, also known as the polymer plastering anti-crack mortar. It is mainly applied to various wall thermal insulation surface layers to form excellent anti-crack and anti-seepage surface layer, which is conducive to protecting the comprehensive performance of the thermal insulation base layer, improving the affinity of the thermal insulation surface layer interface, and providing excellent interface base layer for the construction of subsequent finishing materials. Let's talk about the application of Jinan plastering mortar and other precautions.

作用：

effect:

抹面砂漿常分兩層或三層進行施工：

The plastering mortar is usually constructed in two or three layers:

①底層砂漿的作用是使砂漿與基層能牢固地粘結，應有良好的保水性。②中層主要是為了找平，有時可省去不做。③面層主要為了獲得平整、光潔地表面效果。

① The role of the bottom mortar is to make the mortar and the base firmly bond and have good water retention. ② The middle layer is mainly for leveling, sometimes it can be omitted. ③ The main purpose of the surface course is to obtain a flat and smooth surface effect.

抹面砂漿特點：

Features of plastering mortar:

①抹面層不承受荷載；

① The plastering layer does not bear the load;

②抹面層與基底層要有足夠的粘結強度，使其在施工中或長期自重和環境作用下不脫落、不開裂；

② The plastering layer and the base layer shall have sufficient bonding strength to prevent them from falling off and cracking during construction or under long-term self-weight and environmental effects;

③抹面層多為薄層，并分層涂抹，面層要求平整、光潔、細致、美觀；

③ The plastering layer is mostly a thin layer and is applied in layers. The surface layer is required to be flat, smooth, detailed and beautiful;

④多用于干燥環境，大面積暴露在空氣中。

④ It is mostly used in dry environment and exposed to air in large area.

注意事項：

matters needing attention:

1、抹面砂漿現場施工不需添加任何外加劑，嚴格控制水固比和抹灰時間。

1. The plastering mortar construction on site does not need to add any additives, and the water-solid ratio and plastering time shall be strictly controlled.

2、運輸過程中應注意防潮、防雨、防曝曬。

2. During transportation, pay attention to moisture-proof, rain-proof and sun-proof.

3、抹面砂漿在儲存過程中，應存放在干燥通風處，避免受潮。

3. The plastering mortar shall be stored in a dry and ventilated place to avoid moisture during storage.

4、抹面砂漿在使用時，一次不可調制過多，視施工用量而定，如出現未使用完就結塊，不能繼續使用。

4. When plastering mortar is used, it should not be too much at one time. It depends on the amount of construction. If it agglomerates before it is used, it cannot be used again.

5、施工及儲存溫度要求在5℃以上。

5. The construction and storage temperature shall be above 5 ℃.

6、每次施工完畢后，要及時清洗干凈施工工具和攪拌器材，以免影響下次使用。

6. After each construction, clean the construction tools and mixing equipment in time to avoid affecting the next use.

抹面砂漿適用于建筑、裝修工程的內、外墻、罩面、底面、頂棚抹灰，對此您有需求就來我們網站http://m.cnlifelk.cn咨詢！

The plastering mortar is applicable to the plastering of the interior, exterior wall, cover, bottom and ceiling of the building and decoration works. Please come to our website if you need it http://m.cnlifelk.cn consulting service